πŸ’§

WellDepthData.com

USGS National Groundwater Atlas

Home / States / Kansas
STATE REGISTRY: KS OFFICIAL USGS LOGS 2026 EDITION

Kansas Water Well Depth & Drilling Cost Guide

Authoritative hydrogeological intelligence for Kansas. Regulated by the Kansas Department of Health and Environment (KDHE). The statewide median drilling depth is 165 feet (ranging 45–450 ft) with an average drilling cost of $35 per foot ($25 to $58/ft).

πŸ“Š View County Breakdown πŸ’° Turnkey Cost Breakdown πŸ“‹ Get 3 Local Driller Quotes
πŸ’‘

Quick Hydrogeological Fact Sheet: Kansas

To reach potable water in Kansas, residential wells require drilling an average of 165 feet deep. Total turnkey installation costs average $8,200 USD for a completed 6-inch casing well, 1.5 HP submersible pump, pressure tank, and state permits. The standing static water table sits at approximately 55 feet below surface level, producing a reliable average flow rate of 28 GPM across the primary High Plains (Ogallala) Aquifer.

KS Median Depth πŸ“
165 ft
Typical Range: 45 - 450 ft
Avg Cost per Foot πŸ’΅
$35 /ft
Drilling + 6" Sanitary Casing
Static Water Level 🌊
55 ft
Depth to standing water table
Avg Turnkey Well Cost 🏷️
$8,200 USD
Includes pump, tank & permits

Kansas County-Level Well Logs & Average Depths

Official USGS hydrogeological monitoring stations, static levels, and driller completion records.

2 Key Counties Logged
County Name Median Depth (ft) Avg Cost / Foot Typical Yield Primary Aquifer Local Action
Sedgwick County 80 ft $30 /ft 35 GPM
Equus Beds Alluvium
Johnson County 220 ft $40 /ft 12 GPM
Pennsylvanian Limestone

πŸ’° Estimated Turnkey Cost Itemization in Kansas

Component-by-component breakdown for a standard residential water well (165 ft average).

TURNKEY ESTIMATE
System Component Specification in Kansas Unit Cost Estimated Subtotal
Borehole Drilling & Sanitary Casing 165 ft depth with standard 6" PVC/Steel Casing & Drive Shoe $35 /ft $5,775 USD
Submersible Pump & Drop Pipe 1.0 HP – 1.5 HP Stainless Submersible Pump with 12-gauge electrical drop cable Turnkey Pump Unit $2,250 USD
Pressure Tank & Control Switch 40-gallon Captive Air Pressure Tank, 40/60 PSI Pressure Switch & Gauge Standard Assembly $1,200 USD
State Permits, Sanitary Grouting & Lab Water Testing Mandatory Kansas Department of Health and Environment (KDHE) permit, bentonite surface seal, and EPA drinking panel State Fee + Lab $550 USD
TOTAL ESTIMATED TURNKEY INVESTMENT Includes excavation, drilling, plumbing hookup, and water inspection $8,200 USD
πŸ›οΈ

Kansas Aquifers & Subsurface Geology

Ogallala gravel/sand in west; alluvial valley sand in central; limestone/shale in east

Primary Formations:
High Plains (Ogallala) AquiferEquus Beds Aquifer
πŸ§ͺ

Water Quality & Recommended Filtration

Hardness Level: 240 PPM
Typical pH: 7.6
Common Minerals & Trace Elements:
HardnessSulfatesTDS
Recommended Filtration: Water Softener + Reverse Osmosis System

βš–οΈ Kansas Well Drilling Regulations & Legal Setbacks

Septic Tank Setback:
50 Feet Minimum
Property Line Setback:
25 Feet
State Permit Fee:
$100 USD
Licensing Authority:
Kansas Department of Health and Environment (KDHE)
KANSAS COST ESTIMATOR

Calculate Drilling Cost in Kansas

Pre-loaded with Kansas median depth (165 ft) and average cost ($35/ft).

Target Depth: 165 ft
Cost per Foot (KS): $35 /ft
Estimated Turnkey Investment (KS):
$8,200 USD
Get Exact Local Quote βž”
COMMONLY ASKED QUESTIONS

Frequently Asked Questions: Drilling Wells in Kansas

1. How deep do you usually have to drill for water in Kansas?

Across Kansas, the median residential water well is drilled to 165 feet. However, shallow alluvial wells can hit water as high as 45 feet, while deep bedrock or limestone aquifer wells may require drilling down to 450 feet to reach sufficient pressure and yield.

2. How much does a complete water well cost in Kansas?

On average, homeowners in Kansas invest $8,200 USD for a complete turnkey system. Drilling alone costs $35 per foot (ranging $25–$58/ft), while submersible pumps, pressure tanks, state permit fees ($100), and electrical hookups comprise the remaining balance.

3. What is the required setback from septic tanks in Kansas?

State health mandates overseen by the Kansas Department of Health and Environment (KDHE) require a minimum separation distance of 50 feet from any septic tank, leach field, or potential contamination source, plus at least 25 feet from adjacent property boundaries.

4. What is the groundwater quality like in Kansas?

Wells in Kansas typically yield water with a hardness reading around 240 PPM and an average pH of 7.6. Key minerals present in natural groundwater include Hardness, Sulfates, TDS. The recommended standard filtration configuration is: Water Softener + Reverse Osmosis System.

πŸ—ΊοΈ Neighboring & Regional Groundwater Guides

Colorado CO
Median: 320 ft | Avg: $54/ft
Aquifer: Denver Basin Aquifers (Dawson, Arapahoe)
Missouri MO
Median: 280 ft | Avg: $37/ft
Aquifer: Ozark Aquifer (Roubidoux, Gasconade)
Nebraska NE
Median: 175 ft | Avg: $34/ft
Aquifer: High Plains (Ogallala) Aquifer
Oklahoma OK
Median: 190 ft | Avg: $36/ft
Aquifer: Garber-Wellington Aquifer (Central OK)
LICENSED & BONDED CONTRACTORS

Request 3 Free Water Well Drilling Estimates in Kansas

Connect with state-certified drilling contractors licensed by Kansas Department of Health and Environment (KDHE). Compare pricing, pump sizing, and warranty terms with zero obligation.