πŸ’§

WellDepthData.com

USGS National Groundwater Atlas

Home / States / Wyoming
STATE REGISTRY: WY OFFICIAL USGS LOGS 2026 EDITION

Wyoming Water Well Depth & Drilling Cost Guide

Authoritative hydrogeological intelligence for Wyoming. Regulated by the Wyoming State Engineer's Office (SEO) - Ground Water Division. The statewide median drilling depth is 240 feet (ranging 60–750 ft) with an average drilling cost of $48 per foot ($34 to $82/ft).

πŸ“Š View County Breakdown πŸ’° Turnkey Cost Breakdown πŸ“‹ Get 3 Local Driller Quotes
πŸ’‘

Quick Hydrogeological Fact Sheet: Wyoming

To reach potable water in Wyoming, residential wells require drilling an average of 240 feet deep. Total turnkey installation costs average $13,800 USD for a completed 6-inch casing well, 1.5 HP submersible pump, pressure tank, and state permits. The standing static water table sits at approximately 55 feet below surface level, producing a reliable average flow rate of 22 GPM across the primary High Plains (Ogallala).

WY Median Depth πŸ“
240 ft
Typical Range: 60 - 750 ft
Avg Cost per Foot πŸ’΅
$48 /ft
Drilling + 6" Sanitary Casing
Static Water Level 🌊
55 ft
Depth to standing water table
Avg Turnkey Well Cost 🏷️
$13,800 USD
Includes pump, tank & permits

Wyoming County-Level Well Logs & Average Depths

Official USGS hydrogeological monitoring stations, static levels, and driller completion records.

2 Key Counties Logged
County Name Median Depth (ft) Avg Cost / Foot Typical Yield Primary Aquifer Local Action
Laramie County (Cheyenne) 210 ft $46 /ft 25 GPM
Ogallala / White River
Natrona County (Casper) 260 ft $50 /ft 18 GPM
Cloverly / Casper Formation

πŸ’° Estimated Turnkey Cost Itemization in Wyoming

Component-by-component breakdown for a standard residential water well (240 ft average).

TURNKEY ESTIMATE
System Component Specification in Wyoming Unit Cost Estimated Subtotal
Borehole Drilling & Sanitary Casing 240 ft depth with standard 6" PVC/Steel Casing & Drive Shoe $48 /ft $11,520 USD
Submersible Pump & Drop Pipe 1.0 HP – 1.5 HP Stainless Submersible Pump with 12-gauge electrical drop cable Turnkey Pump Unit $2,250 USD
Pressure Tank & Control Switch 40-gallon Captive Air Pressure Tank, 40/60 PSI Pressure Switch & Gauge Standard Assembly $1,200 USD
State Permits, Sanitary Grouting & Lab Water Testing Mandatory Wyoming State Engineer's Office (SEO) - Ground Water Division permit, bentonite surface seal, and EPA drinking panel State Fee + Lab $550 USD
TOTAL ESTIMATED TURNKEY INVESTMENT Includes excavation, drilling, plumbing hookup, and water inspection $13,800 USD
πŸ›οΈ

Wyoming Aquifers & Subsurface Geology

Tertiary sandstone/conglomerate in basins; fractured Paleozoic limestone/sandstone on uplifts

Primary Formations:
High Plains (Ogallala)Wasatch-Fort Union AquiferPaleozoic Carbonates
πŸ§ͺ

Water Quality & Recommended Filtration

Hardness Level: 220 PPM
Typical pH: 7.7
Common Minerals & Trace Elements:
HardnessSulfatesTDSIron
Recommended Filtration: Water Softener + Reverse Osmosis

βš–οΈ Wyoming Well Drilling Regulations & Legal Setbacks

Septic Tank Setback:
100 Feet Minimum
Property Line Setback:
25 Feet
State Permit Fee:
$100 USD
Licensing Authority:
Wyoming State Engineer's Office (SEO) - Ground Water Division
WYOMING COST ESTIMATOR

Calculate Drilling Cost in Wyoming

Pre-loaded with Wyoming median depth (240 ft) and average cost ($48/ft).

Target Depth: 240 ft
Cost per Foot (WY): $48 /ft
Estimated Turnkey Investment (WY):
$13,800 USD
Get Exact Local Quote βž”
COMMONLY ASKED QUESTIONS

Frequently Asked Questions: Drilling Wells in Wyoming

1. How deep do you usually have to drill for water in Wyoming?

Across Wyoming, the median residential water well is drilled to 240 feet. However, shallow alluvial wells can hit water as high as 60 feet, while deep bedrock or limestone aquifer wells may require drilling down to 750 feet to reach sufficient pressure and yield.

2. How much does a complete water well cost in Wyoming?

On average, homeowners in Wyoming invest $13,800 USD for a complete turnkey system. Drilling alone costs $48 per foot (ranging $34–$82/ft), while submersible pumps, pressure tanks, state permit fees ($100), and electrical hookups comprise the remaining balance.

3. What is the required setback from septic tanks in Wyoming?

State health mandates overseen by the Wyoming State Engineer's Office (SEO) - Ground Water Division require a minimum separation distance of 100 feet from any septic tank, leach field, or potential contamination source, plus at least 25 feet from adjacent property boundaries.

4. What is the groundwater quality like in Wyoming?

Wells in Wyoming typically yield water with a hardness reading around 220 PPM and an average pH of 7.7. Key minerals present in natural groundwater include Hardness, Sulfates, TDS, Iron. The recommended standard filtration configuration is: Water Softener + Reverse Osmosis.

πŸ—ΊοΈ Neighboring & Regional Groundwater Guides

Colorado CO
Median: 320 ft | Avg: $54/ft
Aquifer: Denver Basin Aquifers (Dawson, Arapahoe)
Idaho ID
Median: 230 ft | Avg: $46/ft
Aquifer: Snake River Plain Aquifer (Eastern & Western)
Montana MT
Median: 195 ft | Avg: $48/ft
Aquifer: Intermontane Basin Alluvial Aquifers
Nebraska NE
Median: 175 ft | Avg: $34/ft
Aquifer: High Plains (Ogallala) Aquifer
South Dakota SD
Median: 180 ft | Avg: $38/ft
Aquifer: Dakota Sandstone Aquifer
Utah UT
Median: 280 ft | Avg: $50/ft
Aquifer: Great Basin Valley-Fill Aquifers
LICENSED & BONDED CONTRACTORS

Request 3 Free Water Well Drilling Estimates in Wyoming

Connect with state-certified drilling contractors licensed by Wyoming State Engineer's Office (SEO) - Ground Water Division. Compare pricing, pump sizing, and warranty terms with zero obligation.